Base Layer- CH6X, iron in at 145C, let cool, scrape and brush out with Steel or Bronze Brush, polish with White Nylon Brush.
LF Layer- LF6X, repeat steps above.
HF Layer- HF6X, repeat steps above.
Cera F Layer- FC6XS Cold Turbo Solid, rub on and rotofleece in, brush out with Horsehair or Wild Boar Brush, polish with Blue Nylon Brush.
Roughen kick zone with 120grit sand paper.
Binder Layer- VG35, apply one layer and iron in at 115C, smooth with cork and let cool 5-10 minutes outside.
Kicking Layer- VR40 Blue, 3-5 layers, apply layer and cork smooth, repeat.