Base Layer- CH4X, apply at 155C, let cool, scrape and brush with Steel or Bronze brush, polish with White Nylon brush.
LF Layer- LF4X, repeat above steps.
HF Layer- HF4X, repeat above steps.
Cera F Layer- FC6XS Cold Turbo block, apply and rotofleece in, brush out with Horsehair or Wild Boar brush, polish with Blue Nylon brush.
Roughen kick zone with 120grit sandpaper.
Binder Layer- VG35 Green base binder, apply one layer and iron in at 115C, smooth with a cork and let cool.
Kicking Layer- VR30 Light Blue, 3-5 layers, cork each layer smooth.