Base Layer- HF5X
Apply and iron in at 150C, let cool and scrape. Brush out with Steel/Bronze brush, finish with Nylon brush.
Cera F Layer- FC6XS Cold Turbo Block
Apply and Roto-Fleece in. Brush out with Wild Boar/Horsehair brush, finish with Blue Nylon brush.
Roughen kick zone with 120grit sandpaper.
Binder Layer- VG35 Green Base Binder
Apply and iron in, smooth and let cool.
Kicking Layer- VR40
Apply 3-5 layers, cork each layer smooth.
Speed Enhancer (if needed)- VX43
Apply 1-2 layers, cork each layer smooth.