menu search
US
close

Basket

Your shoppingcart is empty.

Are you sure?

Do you wish to remove this product from your basket?

Yes, please No, I clicked wrong
close

Fraktmetoder

På posten

Postkasse Sendingen blir sendt til postkassen din. Transporttid er normalt 3-5 virkedager, avhengig av strekning.

  • Sendingen kan spores ved hjelp av sporingsnummeret.
  • Du varsles om at sendingen er ankommet via SMS, e-post eller hentemelding i postkassen.
  • Transporttid er normalt 3-5 virkedager, avhengig av strekning.
  • Er postkassen din liten eller låst bør du velge servicepakke.
På posten

Hent varene selv på posten Sendingen er en klimanøytral servicepakke som blir levert til ditt postkontor/ post i butikk.

  • Du varsles om at sendingen er ankommet via SMS, e-post eller hentemelding i postkassen.
  • Transporttid er normalt 1-3 virkedager, avhengig av strekning.
  • Sendingen kan spores ved hjelp av sporingsnummeret.
På posten

Levering på døren Sendingen leveres hjem til deg mellom klokken 17 og 21.

  • Sendingen kan spores ved hjelp av sporingsnummeret.
  • Du varsles i god tid om forventet utleveringsdag på sms og / eller e-post, i tillegg til nytt varsel når sendingen er lastet på bil for utkjøring samme kveld.
  • Sjåfør ringer deg på mobiltelefon 30 - 60 minutter før levering.
  • Dersom sendingen ikke kan leveres, blir den fraktet til lokalt postkontor/ post i butikk og du vil motta en varsel om dette via SMS, e-post eller hentemelding i postkassen.

Friday 02/22-2019 -
Sunday 02/24-2019

Location: CABLE WI

Cross Country Cross Country
Cloudy Cloudy
New snow New snow
Share

AMERICAN BIRKEBEINER FRIDAY FINAL GLIDE RECOMMENDATION

Glide wax recommendations

EXPRESS LANE TO HAYWARD Waves Elite thru 2
Base Wax Layer: Apply two (2) layers of Swix LF6X. Use an iron temperature of 145C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race HF Wax Layer: Apply two (2) layers of Swix HF6X. Use an iron temperature of 145C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race Cera F Wax Layer: Apply one (1) layer of Swix F6X Cera F Powder. Use an iron temperature of 165C to apply and move iron quickly over the ski base, 8-10 seconds per ski. Let cool 3-4 minutes. Brush out with Swix T164 Wild Boar Brush or Swix T157 Horsehair Brush. Polish with Swix T160 Blue Nylon Brush.
PRODUCTS NEEDED-
BASE LAYER- SWIX LF6X
HF BASE LAYER- SWIX HF6X
CERA F LAYER- SWIX FC6X CERA F
T179 STEEL BRUSH
T164/T157 WILD BOAR BRUSH/HORSEHAIR BRUSH
T160 BLUE NYLON BRUSH

EXPRESS LANE TO HAYWARD Waves 3-5
Base Wax Layer: Apply two (2) layers of Swix LF7X. Use an iron temperature of 140C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race HF Wax Layer: Apply two (2) layers of Swix HF7X. Use an iron temperature of 140C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race Cera F Wax Layer: Apply one (1) layer of Swix FC7X. Use an iron temperature of 160C to apply and move iron quickly over the ski base, 5-7 seconds per ski. Let cool 3-4 minutes. Brush out with Swix T164 Wild Boar Brush or Swix T157 Horsehair Brush. Polish with Swix T160 Blue Nylon Brush.
PRODUCTS NEEDED-
BASE LAYER- SWIX LF7X
HF BASE LAYER- SWIX HF7X
CERA F LAYER- SWIX FC7X CERA POWDER
T179 STEEL BRUSH
T164/T157 WILD BOAR BRUSH/HORSEHAIR BRUSH
T160 BLUE NYLON BRUSH


EXPRESS LANE TO HAYWARD Waves 6-8
Base Wax Layer: Apply two (2) layers of Swix LF8X. Use an iron temperature of 130C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race HF Wax Layer: Apply two (2) layers of Swix HF8X. Use an iron temperature of 130C to apply. Let cool, scrape and brush with Swix T179 Steel Brush. Then, polish with Swix T161 White Nylon Brush.
Race Cera F Wax Layer: Apply one (1) layer of Swix FC8X. Use an iron temperature of 165C to apply and move iron quickly over the ski base, 5-7 seconds per ski. Let cool 3-4 minutes. Brush out with Swix T164 Wild Boar Brush or Swix T157 Horsehair Brush. Polish with Swix T160 Blue Nylon Brush.
Velocity Enhancer Layer: Apply one (1) layer of Swix FC8XS Warm Turbo Block. Apply and roto fleece in with Swix T18F-2 Roto Fleece, brush out with Swix T164 Wild Boar Brush or Swix T157 Horsehair Brush. Polish with Swix T160 Blue Nylon Brush.
PRODUCTS NEEDED-
BASE LAYER- SWIX LF8X
HF BASE LAYER- SWIX HF8X
CERA F LAYER- SWIX FC8X CERA POWDER
TOPPING LAYER- SWIX FC8XS WARM TURBO BLOCK
T179 STEEL BRUSH
T164/T157 WILD BOAR BRUSH/HORSEHAIR BRUSH
T160 BLUE NYLON BRUSH
T18F-2 ROTO FLEECE

Kickwax recommendations

Make sure the kick zones are completely clean. Then, roughen the kick zone with 150 grit sandpaper. If needed, take a plastic scraper and lightly scrape the kick zone to remove any large base hairs brought up by the sanding.

EXPRESS LANE TO HAYWARD Waves Elite thru 2
Binder Layer: VG35, one (1) layer and iron in at 120C. Smooth with a cork and let cool outside for 5-10 minutes.
Kicking Layer: Apply one (1) layer of V40 Extra Blue and cork smooth. Next, apply two to four (2-4) layers of VR40. Cork each layer smooth.
Note, if more kick is needed, apply one (1) layer of VR45 under the foot and cork smooth.

PRODUCTS NEEDED-
BINDER LAYER- SWIX VG35
KICKING LAYER- SWIX V40 EXTRA BLUE, VR40, AND VR45
TOOLS- T0012 RACING CORK, T77 WAXING IRON

EXPRESS LANE TO HAYWARD Waves 3-5
Binder Layer: VG35, one (1) layer and iron in at 120C. Smooth with a cork and let cool outside for 5-10 minutes.
Kicking Layer: Apply one (1) layer of V40 Extra Blue and cork smooth. Next, apply two to four (2-4) layers of VR45. Cork each layer smooth.
Note, if more kick is needed, apply one (1) layer of VR50 under the foot and cork smooth.

PRODUCTS NEEDED-
BINDER LAYER- SWIX VG35
KICKING LAYER- SWIX V40 EXTRA BLUE, VR40, AND VR45
TOOLS- T0012 RACING CORK, T77 WAXING IRON

EXPRESS LANE TO HAYWARD Waves 6-8
Binder Layer: VG35, one (1) layer and iron in at 120C. Smooth with a cork and let cool outside for 5-10 minutes.
Kicking Layer: Apply one (1) layer of V40 Extra Blue and cork smooth. Next, apply two to four (2-4) layers of VR50. Cork each layer smooth.
Note, if more kick is needed, apply one (1) layer of VR55N under the foot and cork smooth.

PRODUCTS NEEDED-
BINDER LAYER- SWIX VG35
KICKING LAYER- SWIX V40 EXTRA BLUE, VR50, AND VR55N
TOOLS- T0012 RACING CORK, T77 WAXING IRON